Skip Headers
Oracle® Database Error Messages
12c Release 1 (12.1)

E49325-05
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

81 PRCC-01000 to PRCC-01110

PRCC-01000: Parameter {0} value is not valid
Cause: This is an internal error. The value for the specified parameter is null or empty string.
Action: Contact Oracle Support Services.
PRCC-01001: Failed to retrieve install group: {0}
Cause: An attempt to retrieve the install group failed.
Action: Examine the accompanying error messages for details.
PRCC-01002: Failed to update install group: {0}
Cause: An attempt to set the install group failed.
Action: Examine the accompanying error messages for details.
PRCC-01003: Version for module {0} is not available
Cause: An attempt to retrieve the version information for specified module failed.
Action: Examine the accompanying error messages for details.
PRCC-01004: Unknown identifier {0} specified for checking result of operation
Cause: Failed to retrieve the result from the exception data using the specified identifier because the exception did not have the specified identifier.
Action: This is an internal error. Contact Oracle Support Services.
PRCC-01005: Parameter {0} is not an absolute path
Cause: The specified parameter is not an absolute directory path.
Action: Provide an absolute directory path.
PRCC-01006: Path {0} is not a directory
Cause: The specified path is not a directory.
Action: Provide a directory path.
PRCC-01007: Path {0} does not exist
Cause: The specified path did not exist.
Action: Provide an existing directory path.
PRCC-01008: Enumerated type {0} does not have a member with corresponding value of {1}
Cause: This is an internal error.
Action: Contact Oracle Support Services.
PRCC-01009: Parameter {0} cannot have null as a value
Cause: This is an internal error.
Action: Contact Oracle Support Services.
PRCC-01010: {0} was already enabled
Cause: Given entity was already enabled.
Action: No action needed. To re-enable the entity, first disable it and then retry.
PRCC-01011: {0} was already enabled on {1}
Cause: Given entity was already enabled on given nodes.
Action: No action needed. To re-enable the entity on given nodes, first disable it on these nodes and then retry.
PRCC-01012: {0} was already disabled
Cause: Given entity was already disabled.
Action: No action needed. To re-disable the entity, first enable it and then retry.
PRCC-01013: {0} was already disabled on {1}
Cause: Given entity was already disabled on given nodes.
Action: No action needed.
PRCC-01014: {0} was already running
Cause: Given entity is already running.
Action: No action needed. To re-start the entity, first stop it and then retry.
PRCC-01015: {0} was already running on {1}
Cause: Given entity was already running on given nodes.
Action: No action needed. To re-start the entity on given nodes, first stop it on these nodes and then retry.
PRCC-01016: {0} was already stopped
Cause: Given entity was already stopped.
Action: No action needed. To re-stop the entity, first start it and then retry.
PRCC-01017: {0} was already stopped on {1}
Cause: Given entity was already stopped on given nodes.
Action: No action needed. To re-stop the entity on given nodes, first start it on these nodes and then retry.
PRCC-01018: A request to retrieve private network addresses for node {0} found no addresses
Cause: A request to retrieve private network addresses by executing the command 'olsnodes -p' returned no private IP addresses.
Action: Check the command 'oifcfg getif' for cluster_interconnect networks and ensure this node has an IP address on the cluster_interconnect networks.
PRCC-01019: Parameter "{0}" value is not valid
Cause: This is an internal error.
Action: Contact Oracle Support Services.
PRCC-01020: Version {0} cannot be used to administer resource configuration of version {1} or later
Cause: This is an internal error.
Action: Contact Oracle Support Services.
PRCC-01021: One or more of the submitted commands did not execute successfully.
Cause: Either a node failed in the middle of a manageability operation, or the communication between nodes was disrupted.
Action: Examine the accompanying error messages for details.
PRCC-01022: The file system type must be ACFS and not {0}
Cause: Expected ACFS file system while the file system provided in the argument list was non-ACFS.
Action: Make sure that the file system type provided in the argument list is ACFS.
PRCC-01023: The file system type must be non-ACFS
Cause: Expected non-ACFS file system while the file system provided in the argument list was ACFS.
Action: Make sure that the file system type provided in the argument list is non-ACFS.
PRCC-01024: Creation of non-ACFS file system local resource is not supported
Cause: Attempted to create a file system local resource while the file system type was non-ACFS.
Action: Either specify a node or serverpool list to create a cluster resource for the file system or make sure that the file system type is ACFS to create a local resource.
PRCC-01025: Command submitted on node {0} did not complete within {1} seconds
Cause: A command submitted on the node specified did not finish within the specified interval.
Action: Ensure that the node specified is reachable and not overloaded. Contact Oracle Support Services.
PRCC-01100: Failed to create administrator helper resource configuration
Cause: An attempt to create configuration for the administrator helper resource failed. Either the request was not issued by an account with administrative access (root, Administrator and so on) or a problem was detected inside Oracle Clusterware.
Action: Examine the accompanying error messages for details. Make sure that the user has administrative privileges.
PRCC-01101: The database type cannot be MGMTDB.
Cause: An attempt to create the database of the wrong database type has failed.
Action: Contact Oracle Support Services.
PRCC-01102: Mount point path "{0}" is not an absolute path
Cause: The mount point path value was not an absolute path.
Action: Specify an absolute path in the '-mountpoint' argument.
PRCC-01103: Failed to verify node membership
Cause: An error occurred while querying the clusterware to obtain information about the cluster membership.
Action: Examine the accompanying error messages for details.
PRCC-01104: Specified node {0} is not a configured cluster node
Cause: Found a node in the node list that was not configured in the cluster.
Action: Make sure that all the nodes in the specified node list are configured cluster nodes. Check the cluster membership with 'olsnodes'.
PRCC-01105: Server pool or node list cannot be modified because the file system for volume device {0} is a cluster-wide cluster file system
Cause: An attempt to modify the server pool or node list attributes of a cluster file system was rejected because the filesystem resource was a local resource. Placement attributes like server pools or node names apply only to cluster resources.
Action: Do not specify node names and server pools, or remove the local resource and add a cluster resource with the command 'srvctl add filesystem {-serverpools <serverpool_list>|-nodes <node_list>}'.
PRCC-01106: Parameter {0} value {1} is not valid
Cause: This is an internal error. The value for the specified parameter is not valid.
Action: Contact Oracle Support Services.
PRCC-01107: Failed to set the OHASD resource dependencies for ASM
Cause: An attempt to set the OHASD dependencies on all nodes failed.
Action: Examine the accompanying error messages for details.
PRCC-01108: Invalid VIP address {0} because the specified IP address is reachable
Cause: The submitted command was rejected because the Virtual Internet Protocol (VIP) address was reachable.
Action: Configure VIPs to use IP addresses that are not active on any host system and cannot be reached using 'ping'.
PRCC-01109: User {0} is not present on the Access Control List.
Cause: A request to remove a user from an Access Control List specified a user name not in the Access Control List.
Action: Specify a user who is on the Access Control List.
PRCC-01110: User {0} is already added to the Access Control List.
Cause: A request to add a user to an Access Control List specified a user name already on the Access Control List.
Action: Specify a user who is not on the Access Control List.